rfq@cintymcu.com
Resumo do Produto
- Número da peça
- 637-015-232-066
- Fabricante
- EDAC
- Categoria de Produto
- Conectores D-Sub de alta densidade
- Descrição
- D-Sub High Density Connectors Vertical High Density D-Sub Connector
Documentos e mídia
- Folhas de dados
- 637-015-232-066
Atributos do produto
- Series :
- 637
Descrição
D-Sub High Density Connectors Vertical High Density D-Sub Connector
Preço e Aquisição
Produto Associado
Você também pode estar interessado em
| Papel | Fabricante | Estoque | Descrição |
|---|---|---|---|
| HV102 | Amphenol Wilcoxon | 3 | Accelerometers Top exit, isolated sensor w/ extended EMI performance, M12 connector, M6 integral mounting stud, 100 mV/g, 5% sensitivity tolerance |
| 780A-D2 | Amphenol Wilcoxon | 1 | Accelerometers Top exit, compact, general purpose, 100 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector |
| 780A-IS | Amphenol Wilcoxon | 1 | Accelerometers Top exit, compact, general purpose, case isolated, 100 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector |
| 787-500 | Amphenol Wilcoxon | 1 | Accelerometers Side exit, high sensitivity, low frequency, case isolated, MIL-C-5015 connector, 500 mV/g, +/-5% sensitivity tolerance |
| HV201 | Amphenol Wilcoxon | 1 | Accelerometers Top exit, isolated sensor with extended EMI performance, MIL-C-5015 connector, M8 integral mounting stud, 100 mV/g, +/-5% sensitivity tolerance |
| 786A-D2 | Amphenol Wilcoxon | 1 | Accelerometers Top exit, general purpose, 100 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector |
| 736T | Amphenol Wilcoxon | 1 | Accelerometers Top exit, miniature, high frequency, case grounded, microdot connector, 100 mV/g, +/-5% sensitivity tolerance |
| 793-6 | Amphenol Wilcoxon | 3 | Accelerometers Top exit, FireFET, high temp operation to 150 C/302 F, case isolated, 100 mV/g, 10% sensitivity tolerance, MIL-C-5015 connector |
| PC420AR-05-DA | Amphenol Wilcoxon | 1 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, RMS, 5 g (49 m/sec2), Dynamic Acceleration -100 mV/g, (10.2 mV/m/sec2), 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| 726T | Amphenol Wilcoxon | 1 | Accelerometers Top exit, microdot connector, low noise floor, case isolated, 100 mV/g, 5% sensitivity tolerance |
| 799LF | Amphenol Wilcoxon | 1 | Accelerometers Top exit, low noise, low frequency (0.1 Hz), MIL-C-5015 connector, 500 mV/g, +/-5% sensitivity tolerance |
| 797L-35 | Amphenol Wilcoxon | 2 | Accelerometers Side exit, 0.2 Hz low frequency, IsoRing, 500 mV/g, 5% sensitivity tolerance, MIL-C-5015 connector |
| 732-1D | Amphenol Wilcoxon | 2 | Accelerometers Top exit, miniature, high frequency, case isolated, BNC connector, 10 mV/g, 5% sensitivity tolerance |
| 797R | Amphenol Wilcoxon | 1 | Accelerometers Side exit, radiation-resistant, low frequency, IsoRing, case isolated, MIL-C-5015 connector, 100 mV/g, +/-5% sensitivity tolerance |
| 793L | Amphenol Wilcoxon | 1 | Accelerometers Top exit, low frequency (0.2 Hz), case isolated, 500 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector |
