sales@szcinty.com
Product overview
- Part Number
- KTR25JZPJ110
- Manufacturer
- ROHM Semiconductor
- Product Category
- Thick Film Resistors - SMD
- Description
- Thick Film Resistors - SMD 1210 11ohm 5% High Voltage
Documents & Media
- Datasheets
- KTR25JZPJ110
Product Attributes
- Case Code - in :
- 1210
- Case Code - mm :
- 3225
- Features :
- -
- Maximum Operating Temperature :
- + 155 C
- Minimum Operating Temperature :
- - 55 C
- Packaging :
- Cut Tape, MouseReel, Reel
- Power Rating :
- 330 mW (1/3 W)
- Resistance :
- 11 Ohms
- Series :
- KTR
- Temperature Coefficient :
- 200 PPM / C
- Tolerance :
- 5 %
- Voltage Rating :
- 600 V
Description
Thick Film Resistors - SMD 1210 11ohm 5% High Voltage
Price & Procurement
Associated Product
You May Also Be Interested In
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| PC420AP-50-DA | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, Equivalent Peak, 50 g (490 m/sec2), Dynamic Acceleration -100 mV/g, (10.2 mV/m/sec2) , 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| PC420ATP-05-DV | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, True peak (85 C limited), 5 g (49 m/sec2), Dynamic Velocity 100 mV/ips, (3.94 mV/mm/sec), 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| PC420AR-50-DA | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, RMS, 50 g (490 m/sec2), Dynamic Acceleration -100 mV/g, (10.2 mV/m/sec2), 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| PC420AP-10-DV | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, Equivalent Peak, 10 g (98 m/sec2), Dynamic Velocity 100 mV/ips, (3.94 mV/mm/sec), 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| PC420AR-20-DV | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to acceleration or velocity, peak, rms |
| PC420ATP-20-DV | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, True peak (85 C limited), 20 g (196 m/sec2), Dynamic Velocity 100 mV/ips, (3.94 mV/mm/sec), 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| PC420AP-20-DV | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, Equivalent Peak, 20 g (196 m/sec2), Dynamic Velocity 100 mV/ips, (3.94 mV/mm/sec) , 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| PC420AP-50-DV | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, Equivalent Peak, 50 g (490 m/sec2), Dynamic Velocity 100 mV/ips, (3.94 mV/mm/sec) , 1/4-28 mounting hole (stud included), 3 pin MIL-C-5015 connector. |
| PC420AR-05-DV | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to acceleration or velocity, peak, rms |
| 793T-3 | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, dual output: acceleration, 100 mV/g, 5% sensitivity tolerance; temperature, 10mV/ K (-50 to 120 C), 3 pin MIL-C-5015 connector |
| BB-LP252-2R2-1D | Advantech | 3,000 | Accelerometers Sensor, Accelerometer, 4-20mA Output, T |
| 786F-IS | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, general purpose, 16 integral J9T2A cable, 100 mV/g, +/-5% sensitivity tolerance |
| WSD1XV0 | B+B SmartWorx | 3,000 | Accelerometers WL MESH MOTION SENS INTERNAL ANT |
| HV100LF-500 | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, isolated, low frequency 0.1 Hz sensor w/ extended EMI performance, M12 connector, M8 integral mounting stud, 500 mV/g, 5% sensitivity tolerance |
| HV101LF | Amphenol Wilcoxon | 3,000 | Accelerometers Top exit, isolated, low frequency 0.1 Hz sensor w/ extended EMI performance, M12 connector, 1/4-28 integral mounting stud, 100 mV/g, 5% sensitivity tolerance |
