Descripción del producto
- Número de parte
- WK73R2BTTD97R6D
- Fabricante
- KOA Speer
- categoria de producto
- Resistencias de película gruesa
- Descripción
- Thick Film Resistors - SMD 97.6 ohm 0.5% 1W AEC-Q200
Documentos y Medios
- Hojas de datos
- WK73R2BTTD97R6D
Atributos del producto
- Application :
- Automotive Grade
- Case Code - in :
- 0612 (Reversed)
- Case Code - mm :
- 1632 (Reversed)
- Features :
- Wide-Side Termination
- Maximum Operating Temperature :
- + 155 C
- Minimum Operating Temperature :
- - 55 C
- Packaging :
- Cut Tape, MouseReel, Reel
- Power Rating :
- 1 W
- Qualification :
- AEC-Q200
- Resistance :
- 97.6 Ohms
- Series :
- WK73R
- Temperature Coefficient :
- 100 PPM / C
- Tolerance :
- 0.5 %
- Voltage Rating :
- 200 V
Descripción
Thick Film Resistors - SMD 97.6 ohm 0.5% 1W AEC-Q200
Precio y Adquisiciones
Producto asociado
Usted también podría estar interesado en
Parte | Fabricante | Existencias | Descripción |
---|---|---|---|
SQR111229A | Essentra Components | 3,000 | Mounting Hardware |
IUA-024-1 | SI (Standard Inserts) | 3,000 | Mounting Hardware ULTRASONIC INSERT, ALUM |
STKA-M5-4 | SI (Standard Inserts) | 3,000 | Mounting Hardware INTERNAL-THRD SPACR KNRL ALUM |
BNC0375B | Essentra Components | 3,000 | Mounting Hardware |
RDR111035A | Essentra Components | 3,000 | Mounting Hardware |
SGPC-M4-10 | PEM | 3,000 | Mounting Hardware STUD, SS (303HQ MAT'L) |
HCV6076A | Essentra Components | 3,000 | Mounting Hardware |
IBA-032-4 | SI (Standard Inserts) | 3,000 | Mounting Hardware MOLD-IN INSERT, BLIND, ALUM |
IBA-M5-4 | SI (Standard Inserts) | 3,000 | Mounting Hardware MOLD-IN INSERT, BLIND, ALUM |
STKA-M4-4 | SI (Standard Inserts) | 3,000 | Mounting Hardware INTERNAL-THRD SPACR KNRL |
IBA-M2.5-10 | SI (Standard Inserts) | 3,000 | Mounting Hardware MOLD-IN INSERT, BLIND, ALUM |
SGPC-832-6 | PEM | 3,000 | Mounting Hardware STUD, SS (303HQ MAT'L) |
ISA-256 | SI (Standard Inserts) | 3,000 | Mounting Hardware ISA-256 DBL ENDED NUT ALUM |
ITA-632 | SI (Standard Inserts) | 3,000 | Mounting Hardware MOLD-IN INSERT, ALUM |
SGPC-256-10 | PEM | 3,000 | Mounting Hardware STUD, SS (303HQ MAT'L) |