Descripción del producto
- Número de parte
- RR0816Q-160-D
- Fabricante
- Susumu
- categoria de producto
- Resistencias de película delgada - SMD
- Descripción
- Thin Film Resistors - SMD 1/16W 16ohm 0.5% 50ppm
Documentos y Medios
- Hojas de datos
- RR0816Q-160-D
Atributos del producto
- Case Code - in :
- 0603
- Case Code - mm :
- 1608
- Maximum Operating Temperature :
- + 125 C
- Minimum Operating Temperature :
- - 55 C
- Packaging :
- Cut Tape, MouseReel, Reel
- Power Rating :
- 62.5 mW (1/16 W)
- Resistance :
- 16 Ohms
- Temperature Coefficient :
- 50 PPM / C
- Tolerance :
- 0.5 %
- Voltage Rating :
- 75 V
Descripción
Thin Film Resistors - SMD 1/16W 16ohm 0.5% 50ppm
Precio y Adquisiciones
Producto asociado
Usted también podría estar interesado en
Parte | Fabricante | Existencias | Descripción |
---|---|---|---|
AS568-115 VMQ | Aavid, Thermal Division of Boyd Corporation | 1,000 | Mounting Hardware O-Ring, Silicone / VQM Material, 70 Durometer Hardness, 0.103 Inch Cross Section, 0.674 Inch Inside Diameter, 350 (F) Upper Temperature Range, 1500 PSI |
AS568-114 VMQ | Aavid, Thermal Division of Boyd Corporation | 1,000 | Mounting Hardware O-Ring, Silicone / VQM Material, 70 Durometer Hardness, 0.103 Inch Cross Section, 0.612 Inch Inside Diameter, 350 (F) Upper Temperature Range, 1500 PSI |
AS568-112 VMQ | Aavid, Thermal Division of Boyd Corporation | 920 | Mounting Hardware O-Ring, Silicone / VQM Material, 70 Durometer Hardness, 0.103 Inch Cross Section, 0.487 Inch Inside Diameter, 350 (F) Upper Temperature Range, 1500 PSI |
AS568-110 EPDM | Aavid, Thermal Division of Boyd Corporation | 920 | Mounting Hardware O-Ring, EPDM Material, 70 Durometer Hardness, 0.103 Inch Cross Section, 0.362 Inch Inside Diameter, 300 (F) Upper Temperature Range, 1500 PSI |
AS568-112 EPDM | Aavid, Thermal Division of Boyd Corporation | 1,030 | Mounting Hardware O-Ring, EPDM Material, 70 Durometer Hardness, 0.103 Inch Cross Section, 0.487 Inch Inside Diameter, 300 (F) Upper Temperature Range, 1500 PSI |
AS568-112 FKM | Aavid, Thermal Division of Boyd Corporation | 950 | Mounting Hardware O-Ring, Fluorocarbon / FKM Material, 75 Durometer Hardness, 0.103 Inch Cross Section, 0.487 Inch Inside Diameter, 400 (F) Upper Temperature Range, 1500 PSI |
AS568-012 VMQ | Aavid, Thermal Division of Boyd Corporation | 280 | Mounting Hardware O-Ring, Silicone / VQM Material, 70 Durometer Hardness, 0.07 Inch Cross Section, 0.364 Inch Inside Diameter, 350 (F) Upper Temperature Range, 1500 PSI |
AS568-218 VMQ | Aavid, Thermal Division of Boyd Corporation | 685 | Mounting Hardware O-Ring, Silicone / VQM Material, 70 Durometer Hardness, 0.139 Inch Cross Section, 1.234 Inch Inside Diameter, 350 (F) Upper Temperature Range, 1500 PSI |
AS568-212 EPDM | Aavid, Thermal Division of Boyd Corporation | 900 | Mounting Hardware O-Ring, EPDM Material, 70 Durometer Hardness, 0.139 Inch Cross Section, 0.859 Inch Inside Diameter, 300 (F) Upper Temperature Range, 1500 PSI |
AS568-210 FKM | Aavid, Thermal Division of Boyd Corporation | 600 | Mounting Hardware O-Ring, Fluorocarbon / FKM Material, 75 Durometer Hardness, 0.139 Inch Cross Section, 0.734 Inch Inside Diameter, 400 (F) Upper Temperature Range, 1500 PSI |
AS568-222 FKM | Aavid, Thermal Division of Boyd Corporation | 490 | Mounting Hardware O-Ring, Fluorocarbon / FKM Material, 75 Durometer Hardness, 0.139 Inch Cross Section, 1.484 Inch Inside Diameter, 400 (F) Upper Temperature Range, 1500 PSI |
7004CL03 | Storm Interface | 6 | Mounting Hardware 700Series underpanel mounting kit |
675-BT | Panavise | 4 | Mounting Hardware MULTI MEDIA MOUNT BASE & TOP |
HT9Z-3PK01 | IDEC | 1 | Mounting Hardware HT3P- Lock Release Key |
90100002 | Vector | 3 | Mounting Hardware HANDLE,TOP EJECTOR,BOTTOM FOR REAR I/O |