sales@szcinty.com
Descripción del producto
- Número de parte
- C1210X471K5HACTU
- Fabricante
- KEMET Electronics
- categoria de producto
- Capacitores cerámicos multicapa MLCC - SMD/SMT
- Descripción
- Multilayer Ceramic Capacitors MLCC - SMD/SMT 50V 470pF X8R 1210 10%
Documentos y Medios
- Hojas de datos
- C1210X471K5HACTU
Atributos del producto
- Capacitance :
- 470 pF
- Case Code - in :
- 1210
- Case Code - mm :
- 3225
- Dielectric :
- X8R
- Height :
- 0.78 mm
- Maximum Operating Temperature :
- + 150 C
- Minimum Operating Temperature :
- - 55 C
- Packaging :
- Cut Tape, MouseReel, Reel
- Product :
- General Type MLCCs
- Series :
- SMD Comm X8R HT150C Flex
- Termination :
- Flexible (Soft)
- Termination Style :
- SMD/SMT
- Tolerance :
- 10 %
- Voltage Rating DC :
- 50 VDC
Descripción
Multilayer Ceramic Capacitors MLCC - SMD/SMT 50V 470pF X8R 1210 10%
Precio y Adquisiciones
Producto asociado
Usted también podría estar interesado en
| Parte | Fabricante | Existencias | Descripción |
|---|---|---|---|
| NWA-221 | IDEC | 3,000 | Switch Hardware 22mm START-STOP Nameplate |
| 5.73.055.000/0209 | RAFI | 3,000 | Switch Hardware LEGEND INSERT |
| NWA-205 | IDEC | 3,000 | Switch Hardware 22mm FOR-REV Nameplate |
| NWA-223 | IDEC | 3,000 | Switch Hardware 22mm UP-DOWN Nameplate |
| 5.73.056.000/0209 | RAFI | 3,000 | Switch Hardware LEGEND INSERT |
| NWA-214 | IDEC | 3,000 | Switch Hardware 22mm OPEN-CLOSE Nameplate |
| NWA-202 | IDEC | 3,000 | Switch Hardware 22mm CLOSE-OPEN Nameplate |
| NWA-113 | IDEC | 3,000 | Switch Hardware 22mm LOWER Nameplate |
| NWA-O | IDEC | 3,000 | Switch Hardware 22mm Blank Nameplate |
| NSA-114 | IDEC | 3,000 | Switch Hardware Nameplate for HW1X Eng. OFF |
| NSA-119 | IDEC | 3,000 | Switch Hardware HW1X Nameplate- RESET |
| NSA-121 | IDEC | 3,000 | Switch Hardware HW1X Nameplate- RUN |
| NSA-115 | IDEC | 3,000 | Switch Hardware HW1X Nameplate- ON |
| NSA-127 | IDEC | 3,000 | Switch Hardware HW1X Nameplate- UP |
| 70HH3288-1 | Grayhill | 3,000 | Switch Hardware T STRIP,- +,2PS T STRIP,- +,2PS in header with ejector levers |
