sales@szcinty.com
Descripción del producto
- Número de parte
- D-101-00
- Fabricante
- TE Connectivity / Raychem
- categoria de producto
- Manguitos de soldadura y tubería de protección
- Descripción
- Solder Sleeves & Shield Tubing S-SLEEVE SHLD TRMNTR 17.25 4.55 5.00
Documentos y Medios
- Hojas de datos
- D-101-00
Atributos del producto
- Length :
- 17.5 mm
- Material :
- Polyvinylidene Fluoride (PVDF)
- Maximum Temperature :
- + 150 C
- Series :
- D-101
- Type :
- Solder Sleeve Shield Terminator
Descripción
Solder Sleeves & Shield Tubing S-SLEEVE SHLD TRMNTR 17.25 4.55 5.00
Precio y Adquisiciones
Producto asociado
Usted también podría estar interesado en
| Parte | Fabricante | Existencias | Descripción |
|---|---|---|---|
| HT23-594 | Applied Motion | 3,000 | Stepper Motors Step Motors NEMA 23 High Torque |
| HH23-101 | Applied Motion | 3,000 | Stepper Motors 212.4oz 2.2A bipolar NEMA 23 High Torque |
| HT23-600 | Applied Motion | 3,000 | Stepper Motors Step Motors NEMA 23 High Torque |
| HW23-753 | Applied Motion | 3,000 | Stepper Motors IP65 Stepper NEMA23 2.19"L 153 Torque |
| HW24-108 | Applied Motion | 3,000 | Stepper Motors IP65 Stepper NEMA23 3.72"L 354 Torque |
| HT34-485 | Applied Motion | 3,000 | Stepper Motors 4.3A 650 TRQ 3.11IN |
| STM17S-3RN | Applied Motion | 3,000 | Stepper Motors NEMA17 3Mode 68ozTrq RS-485 Stepper&Drive |
| STM23S-3AN | Applied Motion | 3,000 | Stepper Motors NEMA23 Step 210ozTrq RS-232 Stepper&Drive |
| TSM17Q-1AG | Applied Motion | 3,000 | Stepper Motors NEMA17 RS-232 40ozIn 12-48VDC Intgrd Stpr |
| PM25S-048-314 | Trinamic | 3,000 | Stepper Motors Permanent Magnet Stepper Motor, 2 VDC, 0.8Ncm, 25mm Diameter |
| PM42L-048-285D | Trinamic | 3,000 | Stepper Motors Permanent Magnet Stepper Motor, 3 VDC, 4Ncm, 42mm Diameter |
| PM35S-048-324F | Trinamic | 3,000 | Stepper Motors Permanent Magnet Stepper Motor, 3 VDC, 2.8Ncm, 35mm Diameter |
| PD60-4-1260-CANOPEN | Trinamic | 3,000 | Stepper Motors PANdrive / Smart Stepper Motor, 48V, 3.1Nm, NEMA24/60mm, RS485, CAN, USB, CANopen Firmware |
| 902-0070-000 | ROBOTIS | 3,000 | Stepper Motors DYNAMIXEL MX-64R 6pcs Bulk STALL TORQUE 6.0N*M@12V-4.1A, 63RPM NO LOAD SPEED, GEAR RATIO 200:1, 360-DEGREE 12-BIT CONTACTLESS ABSOLUTE ENCODER, 4096 STEPS/REV, REAL-TIME FEEDBACK |
| HT17-221 | Applied Motion | 3,000 | Stepper Motors .5A Single Shaft 0.9 Deg NEMA 17 |
