sales@szcinty.com
Produktübersicht
- Artikelnummer
- RN732BTTD49R3D100
- Hersteller
- KOA Speer
- Produktkategorie
- Dünnschichtwiderstände
- Beschreibung
- Thin Film Resistors - SMD 1206 49.3 Ohms 0.5% 10PPM
Dokumente & Medien
- Datenblätter
- RN732BTTD49R3D100
Produkteigenschaften
- Case Code - in :
- 1206
- Case Code - mm :
- 3216
- Maximum Operating Temperature :
- + 155 C
- Minimum Operating Temperature :
- - 55 C
- Packaging :
- Cut Tape, MouseReel, Reel
- Power Rating :
- 125 mW (1/8 W)
- Resistance :
- 49.3 Ohms
- Series :
- RN73
- Temperature Coefficient :
- 100 PPM / C
- Tolerance :
- 0.5 %
- Voltage Rating :
- 200 V
Beschreibung
Thin Film Resistors - SMD 1206 49.3 Ohms 0.5% 10PPM
Preis & Beschaffung
Zugehöriges Produkt
Das könnte Sie auch interessieren
| Teil | Hersteller | Lager | Beschreibung |
|---|---|---|---|
| L77TSAG15SOL2RM8ALC | Amphenol Commercial | 3,000 | D-Sub Standard Connectors D-SUB STRAIGHT PCB |
| CGL06PG22-22S-D1L-B-F80 | ITT Cannon | 3,000 | D-Sub Standard Connectors |
| 217-0674-081 | ITT Cannon | 3,000 | D-Sub Standard Connectors DSUB NUT LOCKING ZINC |
| MDVB1-25PH003K | ITT Cannon | 3,000 | D-Sub Standard Connectors |
| 248-8615-100 | ITT Cannon | 3,000 | D-Sub Standard Connectors SHELL 3100 SZ 18 M THRD NCKL |
| 2DD100S-47 | ITT Cannon | 3,000 | D-Sub Standard Connectors |
| MTV1-2SS | ITT Cannon | 3,000 | D-Sub Standard Connectors |
| 320-1062-000 | ITT Cannon | 3,000 | D-Sub Standard Connectors |
| MDVB1-25SH003 | ITT Cannon | 3,000 | D-Sub Standard Connectors |
| 217-0607-020 | ITT Cannon | 3,000 | D-Sub Standard Connectors |
| 217-3410-001 | ITT Cannon | 3,000 | D-Sub Standard Connectors PV 76 22 L C/N |
| L17HTNBS4R1C | Amphenol Commercial | 3,000 | D-Sub Standard Connectors 25P R/A Hi Temp Skt Rear Insert 4-40 |
| 09676096715 | HARTING | 3,000 | D-Sub Standard Connectors D SUB IP67 9 POLE STRAIGHT |
| MTV1-4SH32 | ITT Cannon | 3,000 | D-Sub Standard Connectors |
| 09675098758 | HARTING | 3,000 | D-Sub Standard Connectors D-Sub IP67 9pin female, angled solder pins, rear plastic mounting, w/ M3 thread, board locks, PLS4 |
